CPP 191 STREET DELIVERY VALVES

****Free shipping to lower 48****

191 Delivery Valve Kit - Genuine Bosch Parts Application: 1994-1998 12 valve Dodge Ram Cummins, p7100 pump





kit includes:



6 Bosch 191 Delivery Valves

6 Bosch O -rings

High Flow 191 Delivery Valves For 1994-1998 P7100 Pumps Found on Dodge 12V Cummins Turbo Diesels.

These 191 Delivery Valves don't flow as much fuel as laser cut delivery valves, but they are a great improvement over stock.

You will need to buy or borrow a delivery valve socket to install these.

Installing your delivery valves

List of required tools:

1. ¾" open end wrench

2. 10mm socket

3. 7/16 deep socket

4. Delivery valve socket

5. Torque wrench

6. Needle nose pliers

7. Dental pick ( for easier removal of gaskets-not required on most pumps )

Procedure:

1. Clean engine and pump area with cleaner and compressed air. Be sure to wear safety glasses. Cleanliness is very important.

2. Remove tin Valve cover and air intake horn and wires going to intake heater grid.

3. Remove injector lines. Keep lines together, unbolt clamps (two) where they connect to the cylinder head.

4. Do one barrel at a time. Use special socket to remove the barrel from the pump. Carefully lift out the barrel taking care not to drop spring and seat. See figure 2. Each seat is shimmed to that particular barrel. Do not mix up.