DEVILS OWN STAGE 1

We use only high quality parts, just as we do in our very popular progressive alcohol /water kit without the controller. This kit utilizes a boost pressure switch for activation. You can reap the benefits of having an alcohol/water kit with quality and ability, but without sacrificing reliability.

The main function of the DevilsOwn Diesel Base water/alcohol injection kit is to suppress detonation caused by high temperature and pressure developed within the combustion chamber when the effective push-to-connect ratio has been taken beyond the auto-ignition point by either a turbo or a supercharger.

Cool the air with the DevilsOwn alcohol water injection kit! Water, with its high latent heat content, is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in the modern lean burn engines. Methanol, with its 116 octane and high flash point and specific gravity, further reduces the chances of detonation.



The Benefits of Water-Methanol Injection: ◾Increase horsepower safely by 10-15% ◾Lower air temperatures by 50-200+ degrees ◾Increases octane when you need it under boost ◾Reduces cylinder temperatures up to 300+ degrees ◾No wear issues— only clean combustion chambers ◾Allows you to safely run with more boost and timing

System Contents Include: ◾Adjustable pressure switch ◾300 PSI pump with EPDM seals ◾Heavy duty, nickel-plated check valve ◾20 ft. of black, high pressure nylon tubing ◾3 micro droplet nozzles: DO5, DO10, DO14 ◾Filtered self-sealing tank tap ◾All necessary hardware ◾Detailed instructions

Important Notes: ◾Basic hand tools are required for installation ◾Proper tuning is required to achieve maximum results ◾Typical install time is 2-3 hours

FAQ's:

Methanol water injection FAQ's Instruction:

Stage 1 Water methanol injection instructions

Warranty:

DevilsOwn Injection stands behind its parts and warrants this system free of defects for up to 1 year after purchase. Refer to our warranty page for complete details.