Fire Ring Head Gasket Set

****Free shipping to lower 48****

Fire-Ring Head Gasket Specs.





.105” Fire-Ring Dimensions



Typical 12/24V Head Gaskets measure .060”-.064” before they are crushed . (***This will vary slightly depending on the manufacturer along with what production date and location where the gaskets were produced***)



The desired protrusion on the Fire-Ring is right around .015” (+/- .001) after taking into consideration the thickness of the gasket and the depth of the groove cut.



Typically the groove depth needs to be in the .030”-.034” range depending on the thickness of the gasket being used.



The groove O.D. when using the .105” Rings is typically 4.540” We normally use a .125 wide cutter.



***PLEASE NOTE THIS IS A ROUGH GUIDE ONLY, THESE SPECS NEED VERIFIED ON EACH AND EVERY APPLICATION DUE TO THE MULTIPLE VARIABLES INVOLVED***