MAIN BEARINGS

Tighten the bolts in the sequence shown using the following steps:

STEP 1-Torque all bolts in sequence to 60 Nm (44 ft. lbs.) torque.

STEP 2-Torque all bolts in sequence to 119 Nm (88 ft. lbs.) torque.

STEP 3-Torque all bolts in sequence to 176 Nm (129 ft. lbs.) torque.

Turn the crankshaft to determine that it will rotate freely all 360°. Check the main bearing cap installations and/or the bearing sizes if the shaft does not turn easily.