SMARTY SSR (FREE NEXT DAY AIR!)

Product Description
****Free Next Day shipping to lower 48****
Fast guide to Smarty SSR special Features
Race performance CaTCHER software inside
More than 15 billions of possible tuning customizations
Fastest download in the industry, up to three times faster than 
the competition, a typical ECM update takes about 3.5 to 5 
minutes, depending on the truck model.
ABS tire height updates in just few seconds.
Not traceable in the stock setting. Smarty leaves no footprint.
Manual High Idle is enabled in all softwares
Reads  Diagnostic Trouble Codes in plain text.
No tools required, no fuses to pull.
USB built in for simple updates .
Most complete keyboard in the industry.
Reliable, it works off your OEM hardware.
Programmable Speed Limiter from 25 to 250 mph
RPM limiter up to 4200
Power on Demand
Fast guide to Smarty SSR software levels
No need for a PC. No need to know about binary code. No need 
to spend countless hours on a complicated software.
No need to become a software engineer to fine tune your truck!
The SSR delivers the right combination of performance 
parameters to fully customize your engine. No matter what 
modifications you have done to it!
Whatever race and class you want to compete in, the SSR has 
the answer!
How it works
The SSR provides just one base performance software that 
takes care of all the limiting factors like the speed / RPM / 
Torque & boost limiters. Then you will need to fine tune the
injection duration, injection timing & rail pressure to the truck's 
needs. The three most critical performance parameters in a 
Diesel engine!
In order to allow the complete customization of the performance 
software to the particular engine's needs, the SSR provides 50 
levels each for the following parameters:
1) Low Load injection Timing ( LLT )
2) High Load injection Timing ( HLT )
3) Low Load injection Duration ( LLD )
4) High Load injection duration ( HLD )
5) Low Load Rail Pressure ( LLRP )
6) High Load Rail Pressure ( HLRP )
All you need to do is to select the tuning parameters that match 
your truck best, voilą.
Power on Demand
100 power levels selectable in just one second during the 
driving!
It's easy: just type the preferred power level directly on Smarty 
keyboard, from 00 to 99.  That's all!
For security reason, the truck waits that the throttle is released 
before applying the new power level.
No trace is left in the ECM!
I herby CLAIM that Smarty is the FIRST AND ONLY downloader 
that does not erase any of the stored data in the ECM. Smarty 
does NOT leave any electronic footprints in the ECM or any 
other electronic module in the truck. Smarty does NOT set ANY 
codes once the ECM is set back to stock. Smarty does NOT 
need to have fuses pulled.
No matter what the competition claims , in one way or another 
they're ALL detectable.
Smarty is NOT!
Yet, Smarty can not do one thing for you. Fix what others have 
broken. Smarty can not restore a key on counter that another 
downloader has erased . Smarty can not fix VIN# troubles 
caused by other products. If your Check engine / ABS light is on 
because another product has screwed your ECM, Smarty can 
not fix it, the other guy HAS to...
ABS / Speedo recalibration
The tire height can be adjusted up to 44" in increments of 10 
tenth of an inch in just a couple seconds. Of course, Smarty 
needs to be VIN# locked to the truck in order to get into the ABS 
adjustment section.
DTC Code reader
The name says it all.
You can read and erase codes. Codes are displayed also in 
plain English. That's old news by now. Smarty S-03 was the first 
one to provide that utility, others found the idea to be a good 
one too.  
( Smarty does erase ABS codes too but does not display them )
ECM update speed
Faster than anything else on the market! Again we've done our 
homework on the protocol. Less than 5 minutes. Three times 
faster than a Star-Scan diagnostic tool or competitor.
We have developed our own bootloader in order to not have to 
pull fuses should an update become interrupted for any reason. 
All you have to do is to turn the key off / key on Smarty does 
everything else on it's own.