VULCAN PERFORMANCE DRAW STRAW

****Free shipping to lower 48****

Accept no imitations! Our DrawStraw™ units are the original DrawStraws!

DrawStraw™I with two return ports ! For 94-04 standard tank modules. Trucks with engine or filter mounted pumps.

Our CNC machined billet DSI with dual return ports allows the user to install a regulated return fuel system without drilling the top of the module or cutting the filler neck tube for the second return, makes for a super clean and secure installation and brings all the return fuel back into the module for replenishment during low fuel situations. The Draw Straw™ I can be used in Dodge trucks with the standard fuel tank module from 94-04. Comes with:

DrawStraw I anodized billet unit Nylon draw tube

3/8" and 1/2" pushlock pump supply connections 5/16" OEM Dorman type male quick connect return connection 3/8" / 1/2" supply pump return connections for a regulated return system (AirDog, and all other systems) Plug for third port if not being used. All necessary components are included*, no need to go shopping for extra parts and no tank drilling! AirDog and other regulated return system installations should route both return lines to the DSI for best results.

As always our kits are compatible with all available pumps and pump systems for the Dodge Cummins application in 1/2 or 3/8". Please call if you have a special application.

Unit comes unassembled. Uses OEM grommet, internal modification to fuel module required.

DSI for standard modules only. For trucks with in-tank pumps check our Draw Straw™ V P/N DSV

Picture for representation only. May come with steel or brass fittings. *If used as an OEM replacement with a stock fuel system 18" of 3/8 fuel line will be needed or you may go to the DSI Configurator to custom build your unit..