White 7 Color 30 PSI Fuel Pressure Gauge

GlowShift’s White 7 Color Series 30 PSI Fuel Pressure Gauge is perfect for any diesel truck that is running lower fuel pressure levels. This diesel fuel pressure gauge ensures your truck’s fuel systems is running at its peak, and the pressure is not to low which could result in damage to your fuel pump, injectors, and a loss of overall horsepower. This 30 PSI fuel pressure gauge includes a 1/8th NPT 30 PSI fuel pressure sensor allowing it to be installed directly to your fuel system. Featuring an illuminated red needle that sweeps 270 degrees and is powered by stepper motor technology, this gauge offers smooth needle movement and extremely accurate readings. This fuel pressure gauge also features a magnified lens and 7 color through dial LED lighting that lets you match your factory dash lights or add a custom look to your interior. GlowShift’s 7 color through dial LED lighting system allows the user to easily cycle through 7 solid color modes, along with 2 color cycle modes, and for easier night driving the LEDs can be dimmed 30% when connected to your factory headlight switch. With the included color memory recall feature you don’t need to worry about adjusting the color of your gauge every time you turn your vehicle. GlowShift stands behind all of its products by including free lifetime technical support and a one year limited warranty with every gauge purchase. 2 1/16 Inch (52mm) White Face Gauge with a Magnified Lens Fuel Pressure Reading from 0 to 30PSI 7 Color LED Through Dial Lighting with Color Recall Ability 7 Solid Color Settings and Two Color Cycle Modes Dimmer Wire Allows the Gauge to Dim 30% Electronic Fuel Pressure Sensor with 1/8th NPT Male Threads Stepper Motor Technology Mounting Hardware Installation Instructions Free Lifetime Technical Support One Year Limited Warranty Optional 7 Color Series Extended Wire Harness allows you to easily install and power your gauges. This wire harness replaces the included 18 inch lead wires, and effortlessly snaps into the back of your 7 Color Series Gauge using the featured modular connector, giving you 3 ½ feet of power wire and 10 feet of sensor wire so no additional wire extensions should be needed. Note: A Snubber Valve is required when installing a 30 PSI Fuel Pressure Gauge into a 1986-2012 Dodge Ram Cummins. The Snubber Valve regulates, normalizes and eliminates fuel pressure spikes that are present during the initial ignition and startup on the Dodge Cummins Diesel Engine through the use of a regulator. High pressure fuel system spikes during startup are harmful and may cause early and unexpected failure of electronic fuel pressure sensors and/or sending units for fuel pressure gauges.